It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
A manual hard to find. It was very helpful to restore my device.
Text excerpt from page 52 (click to view)
1
2
3
4
Arrangement of the flexible cable for the pickup
: Conductive surface
A
Note: Be sure to move the Pickup Assy-S to the innermost perimeter.
1 2 3
Fold the flexible cable inward at the position of the reference line. Attach the flexible cable of the pickup to the connector. Fold the flexible cable of the pickup with the backing inward.
7
Pass the flexible cable below the hook, and fold it back. Make sure that the cable does not have any slack
7
Reference line
B
2
3
1
Hook
Backing 97mm ± 2mm
Front Side
Bottom View
C
8 4
Pass the flexible cable through the hook not allowing any slack. Make sure there is no slack in the cable Reference line
Fold the flexible cable back at the hook. Make sure that the cable is loose Hook
8 4
Hook
D
5 6
E
Fold the flexible cable as indicated in the photo. Hook the part folded in Step 1 to the hook.
