First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Text excerpt from page 59 (click to view)
5
6
7
8
7. GENERAL INFORMATION
7.1 DIAGNOSIS
A
- Removing the Case (not shown) 1. Remove the Case.
- Removing the CD Mechanism Module (Fig.1)
CD Mechanism Module
1
Remove the four screws.
Disconnect the connector and then remove the CD Mechanism Module.
1 1
B
- Removing the Grille Assy (Fig.1)
2
Remove the two screws and then remove the Grille Assy.
2
1 1
2
C
Grille Assy
- Removing the Tuner Amp Unit (Fig.2)
Fig.1
1 2 3 4
Remove the screw.
2
2 2
D
Remove the three screws.
Straighten the tabs at three locations indicated. Remove the screw and then remove the Tuner Amp Unit.
4 1
E
3
3
3
Tuner Amp Unit The Tuner Amp Unit may appear slightly different to the unit shown above.
