as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 31 (click to view)
Section
Audio Adjustments
07
1 Press EQ to select the equalizer. Press EQ repeatedly to swith between the following equalizer.
SUPER BASS�POWERFUL�NATURAL� VOCAL�CUSTOM1�CUSTOM2�FLAT
Fine adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ Low/EQ Mid/EQ High).
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM1 or
CUSTOM2.
Level (dB) Q=2N Center frequency Q=2W
Frequency (Hz)
1 Press AUDIO to select the equalizer mode . Press AUDIO until EQ Low/EQ Mid/EQ High appears in the display. 2 Select the equalizer band you want to adjust with 2/3. EQ Low (low)�EQ Mid (mid)�EQ High (high) 3 Press 5 or � to adjust the equalizer curve. Each press of 5 or � increases or decreases the equalizer curve respectively. � +6 � �6 is displayed as the equalizer curve is increased or decreased. Note � If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve is updated.
1 Press AUDIO and hold unitil frequency and the Q factor (e.g., F 80 Q 1W) appears in the display. 2 Press AUDIO to select the desired band for adjustment. LOW (low)�MID (mid)�HIGH (high) 3 Select the desired frequency with 2/3. Press 2 or 3 until the desired frequency appears in the display. LOW : 40�80�100�160 (Hz) MID : 200�500�1 k�2 k (Hz)
HIGH : 3.15 k�8 k�10 k�12.5 k (Hz)
English Español Deutsch Français Italiano Nederlands
4 Press 5/� to select the desired Q factor. Press 5 or � until the desired Q factor appears in the display.
2 N�1 N�1 W�2 W
Note � If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve is updated.
