Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 28 (click to view)
Audio Adjustments
Recalling sound field programs
1. Press AUDIO and then press SFC to select the sound field control mode. 2. Press the corresponding button to select the desired sound field program. Button STUDIO CLUB HALL DOME OCT BBE Effect Studio Club Concert hall Dome Octaver 1 and 2 BBE
Adjusting equalizer curves
The factory supplied equalizer curves, with the exception of �FLAT�, can be adjusted to a fine degree (nuance control). 1. Press AUDIO and then press EQ1 to select the graphic equalizer mode. 2. Press 5 or � to adjust the equalizer curve. Each press of 5 or � increases or decreases the equalizer curve respectively. � �+6� � ��6� is displayed as the equalizer curve is increased or decreased. Note: � The actual range of the adjustment differs depending on which equalizer curve is selected. � The equalizer curve with all frequencies set to 0 cannot be adjusted. � You can use 2 and 3 to select the desired equalizer curve.
� Press the same button again to cancel the selected sound field program.
Switching the octaver setting
You can switch the octaver setting. �OCTAVER2� has a stronger effect �OCTAVER1�. 1. Press AUDIO and SFC and then press OCT to select octaver. 2. Press 5 or � to switch the octaver setting. Each press of 5 or � switches the octaver setting between 1 and 2.
Adjusting 13-band graphic equalizer
For �CUSTOM1� and �CUSTOM2� equalizer curves, you can adjust the level of each band. � A separate �CUSTOM1� curve can be created for each source. (The built-in CD and the multi-CD players are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than �CUSTOM2� is selected, the equalizer curve settings will be memorized in �CUSTOM1�. � A �CUSTOM2� curve can be created common to all sources. If you make adjustments when the �CUSTOM2� curve is selected, the �CUSTOM2� curve will be updated.
Adjusting BBE sound level
For BBE sound processing technology, you can adjust the level of BBE. 1. Press AUDIO and SFC and then press BBE to select BBE. 2. Press 5 or � to adjust the level of BBE. Each press of 5 or � increases or decreases the level of BBE. � �+4� � ��4� is displayed as the level is increased or decreased.
