Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Text excerpt from page 11 (click to view)
1-2-3. Mother PC Board 1. Remove the rear panel. (Refer to item 1-1-4.) 2. Remove the Tuner Unit PC board. (Refer to item 1-2-1.) 3. Remove the Digital PC board. (Refer to item 1-2-2.) 4. Disconnect three connectors (1). 5. Remove five screws (2) and the screw (3). 6. Pull out the Mother PC board (4) toward the rear side (indicated by the arrow).
