Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
12.4.1. Removal of the Zoom Motor Unit and Master Flange Unit
1. Remove the solders (2 points). 2. Remove the lock (3 points). 3. Unscrew the 5 screws (A). 4. Remove the Zoom Motor Unit to the indicated by arrow. 5. Remove the cover. 6. Remove the master flange unit.
1. Push the drive unit to the indicated by arrow from lens side, and then remove the unit of drive/direct unit, 1st lens frame/2nd lens frame move unit from the fixed frame unit.
12.4.2. Removal of the Drive/Direct Unit, 1st Lens Frame/2nd Lens Frame Move Unit
1. Turn the drive gear to the indicated by arrow fully.
