|
|
|
Who's Online
There currently are 5864 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great scan but please note that it is entirely in GERMAN.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Others
Troubleshooting
1: The power does not turn on. 1-1: Are the batteries inserted? Check whether the batteries are inserted. 1-2: Is the battery power sufficient? 2: As the power is turned on, it turns off immediately. 2-1: Is the battery power insufficient to operate the camera? Replace it with new one. 2-2: Are the batteries other than the recommended ones? 3: The image cannot be recorded. 3-1: Is the Memory Card inside? 3-2: Is the mode dial correctly set? Check it. 3-3: There is no memory capacity left on the card. Before recording, delete some images. 4: The image is not displayed on the LCD monitor. 4-1: Is the LCD monitor set to OFF? 4-2: Does the economy mode work? 5: 5: 6: 6: 7: 7: The LCD monitor is too bright or dark. Adjust the brightness of the LCD monitor. Flash does not light. The flash mode is set to forced OFF. Change the flash mode. The display or images on the LCD monitor are not focused. Set the mode dial to the mode corresponding to the distance to the subject. 8: The image will not play back. 8-1: Is the Memory Card inside? 8-2: There is no image in the Memory Card. 8-3: The mode dial is not set to playback [ 9: ]. The image is not displayed on the
television. 9-1: Is the camera correctly connected with the TV? Check it. 9-2: Set the TV to video input mode. 10: When connecting to a PC, images cannot be transferred. 10-1: Check that the camera is correctly connected to the PC. 10-2: Is the camera correctly recognized by the PC? 11: The clock setting is reset. 11-1: If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again. 11-2: When you take a picture before setting the clock, [0.0.0 0:00] is recorded.
93
|
|
|
> |
|
