I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Text excerpt from page 25 (click to view)
4. Remove the 3 cam caps.
8.4.2.
Removal of the Direct Frame Unit
1. Turn the drive frame unit to the indicated by arrow. (Retracting direction)
5. Pull down the plate part of master flange unit (refer to arrow(1) ), and then turn the master flange unit to counterclockwise fully (refer to arrow(2) ). 6. Remove the direct frame/drive frame/1st lens frame/2nd lens frame unit to the indicated by arrow.
2. Remove the direct frame/1st lens frame/2nd lens frame unit from drive frame to the indicated by arrow.
3. Push the 1st lens frame/2nd lens frame unit from lens front side, and then remove the 1st lens frame/2nd lens frame unit from direct frame.
