The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 35 (click to view)
http://getMANUAL.com
Saving the button allocations � F5 (SELECT MEMORY), F7 (SAVE MEMORY) To save the changed button allocations in nonvolatile memory within the control panel, use the following procedure.
1 2 3
Press F5 (SELECT MEMORY). Select the memory by number (1 to 4). Press F7 (SAVE MEMORY). This saves the button allocations in memory within the control panel, and the register indications change to light blue (FULL). If a set of button allocations is already stored in this memory, the following message appears.
Do you want to overwrite ? [OK](ENTER)/[CANCEL](EXIT)
To overwrite, press the ENTER button, and to cancel the operation press the EXIT button. Loading button allocations � F5 (SELECT MEMORY), F6 (LOAD MEMORY) Use the following procedure.
1 2 3
Press F5 (SELECT MEMORY). Select the memory by number (1 to 4). Press F6 (LOAD MEMORY). This loads the button allocations from memory in the control panel.
