This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 3 (click to view)
9) Use a small flat head screwdriver to pry the top hinge hole cover from the dryer�s left side. Lift the top hinge hole cover slightly, and remove it as shown in Figure 13.
11) Take the supplied bottom hinge hole cover, position it on the dryer�s right side as shown in Figure 15, and press it into place.
Figure 15 Figure 13
NOTE: Considerable pressure is required to insert the spacer nuts. 13) Take the two supplied spacer nuts, position them on the dryer�s left side as shown in Figure 17, and press them into place.
Figure 17
12) Take the supplied latch retainer, positon it on the dryer�s right side as shown in Figure 16, and press it into position.
Figure 16
10) Take the supplied top hinge hole cover, position it on the dryer�s right side as shown in Figure 14, and press it into place.
14) Take the supplied left-side version hinge and position it on the dryer�s left side as shown in Figure 18. Make certain that the two holes on the hinge line up with the two spacer nut holes.