WHIRLPOOL DP3840XPN0
Owner's Manual

Cycle

Control

Knob

Selecting
NORMAL

a cycle

HEAVY Cycle

A double wash for normal to heavily soiled loads. [The Energy Guide Label data is based on this cycle.) Cycle time is about 60 minutes.

NORMAL LIGHT Cycle
For normal,everyday Cycle time is about soiled loads 55 minutes.

RINSE 81 HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes. Use AIR DRY only.

HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the dishwasher is heated during the �dry� part of the cycle. If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes ta ke longer to dry [overnight) and some water spotting may result. Some items (such as plastics] drying. may need towel

To add a dish after starting
1. To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed NORMAL LIGHT. 2. Unlatch the doorto stop the cycle, but don�t open it until the spray arms stop spinning. 3. Open the door and add the dish.

4. Close the door. Do not latch

It. Wait 30 sec-

onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle. 5. Latch the door. The dishwasher WIII start from where it stopped. 9