Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 9 (click to view)
NORMAL WASH Cycle
A double wash for normal to heavily soiled loads. (The Energy Guide Label data is based on this Cycle.) Cycle time is about 6.3 minutes.
LIGHT WASH Cycle
For normal, everyday soiled loads. Cycle time is about 58 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed one or more days later. Cycle time is about12 minutes. Use AIR DRY only.
HEAT DRY or AIR DRY?
If the HEAT DRY Optton is selected, air in the dishwasher is heated during the �dry� part of the cycle. If the AIR DRY Optton is selected, air in the dishwasher is not heated. Using this option helps
save energy, but dishes take longer night) and some water spotting Some items (such as plastics) may drying. For best resultsuse a liquid rinse Jet-Dry? 2. Turn the Cycle Control
to dry (overmay result. need towel aid such as
Changing a setting
You can change a setting anytime during any cycle. 1. Lift up on the door latch to unlatch the door and stop the cycle. Don�t open the door until the spray arms stop spinning.
Knob clockwise
to the
cycle you want. 3. Be sure the detergent dispensers are filled properly for the new cycle. 4. Press door firmly to latch it. The dishwasher will automatically start the new cycle.
To add a dish after starting
1. To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LIGHT WASH. 2. Lift up on the door latch to unlatch door to stop the cycle. Don�t open the door until the spray arms stop spinning. 3. Open the door and add the dish. 4. Close the door. Do not latch it. Wait 30 seconds for air in the dishwasherto warm up. This helps reduce the amount of moisture that can come from the vent when restarting the cycle. 5. Press door firmly to latch it. The dishwasher will automatically start where it stopped.
