This manual is all I need to check and repair my equipment. Thank you....
Text excerpt from page 8 (click to view)
1-1-4. RAM Drive (1) Remove the top cover. (Refer to item 1-1-1.) (2) Remove the front panel. (Refer to item 1-1-2.) (3) Disconnect the flexible cable (1). (4) Remove the piece of tape (2). (5) Disconnect the connector (3). (6) Remove two pieces of tape (4). (7) Remove three screws (5), and then remove the acrylic board (6). (8) Remove four screws (7), and then remove the RAM drive (8). (Note) After replacing, tape on three points of (2) and (4) as they were.
