SONY DSC-1024HD
Service Manual

Zooming and resizing the picture
3
S
ON/OFF TV PJ OFF
COMMAND DISPLAY MODE ON/OFF

Using the memory

2
OVER FLOW OVER FLOW SIGNAL FORMAT IN NTSC PAL PAL 31.5k 31.5k 37k 37k 48k 48k 64k OTHERS 64k 1080i CHROMA PHASE CONTRAST APERTURE STILL INPUT SELECT OPEN SCAN CONVERTER DSC-1024HD OPEN SCAN CONVERTER DSC-1024HD

S
ON/OFF

TV PJ OFF

IN NTSC TEST PATTERN LINE DOUBLER OUTPUT FORMAT OUT NTSC

PAL PAL

SIGNAL FORMAT 31.5k 37k 48k 31.5k 37k 48k

64k OTHERS INPUT SELECT 64k 1080i CHROMA PHASE CONTRAST APERTURE STILL

COMMAND DISPLAY MODE ON/OFF

GEN-LOCK

1

2

3

TEST PATTERN

LINE DOUBLER

OUTPUT FORMAT

OUT NTSC

1

2

3

GEN-LOCK

MENU MENU
H V H H

V H

ENTER
ZOOM

CENT

SIZE
V

ZOOM

ENTER

CENT

SIZE
V

MENU button H/V SIZE buttons ZOOM � button

ENTER button

CENT�/� buttons

You can zoom up the picture making it 2 , 3 or 4 times larger than the original size. You can also shift the position of the picture so that it fits in the screen, or adjust the vertical and horizontal size of the picture separately. The adjustments can be carried out for the three inputs separately.

Resizing the picture
Press the H/V SIZE +/� buttons to resize the picture. V SIZE +: to expand vertical size V SIZE �: to reduce vertical size H SIZE +: to expand horizontal size H SIZE �: to reduce horizontal size
V
V SIZE 50

You can store the parameters of the adjusted picture into memory. Five sets of input/output selection, zooming size, H/V size and H/V position can be stored into memory and switched quickly. Up to 5 memories are available.

5

Press the ENTER button. The current data is stored under the selected memory number on the right column. If any data has been stored in the selected memory number, it is now displayed on the left column under �CURRENT.�
MEM SAVE

Storing the current condition
ENTER

Zooming up the picture
1 2 Display the picture on the screen. Press the ZOOM + button.
H SIZE H

1 2

Adjust the picture as necessary. Press the MENU button. The MENU 1 screen appears.
MENU

INPUT SIGNAL OUTPUT ZOOM HSIZE HCENT

CURRENTzMEMORY3 VIDEO1 VIDEO1 NTSC NTSC 31.5k x1 50 50 50 50 31.5k x1 50 50 50 50

1-6

MENU 1 zMEM LOAD MEM SAVE GEOM RESET COLOR RESET ALL RESET INDEX NO. LANGUAGE USE: ENTER NEXT:MENU

VSIZE VCENT

USE:

ENTER CANCEL:MENU

V
H SIZE 50

Current data stored

ZOOM

6

To quit the menu, press the MENU button three times.

ZOOM

x1 zx2 x3 x4

Each time you press the ZOOM + button, the picture is magnified by 2, 3 and 4 times respectively. To zoom down, press the ZOOM � button. 3 Adjust the position of the close-up picture by pressing the CENT �/�/ı/� buttons. �/�: to shift the picture upward/ downward (V CENT) ı/�: to shift the picture to the right/left (H CENT)

The size of the picture is indicated on the screen by the adjustment bar and value 0 to 100. The factory preset value is 50 (except the HDTV or 64 k input).

3

Aspect ratio display
As the picture size changes by the H/V SIZE button, the unit calculates the aspect ratio of the converted picture and displays it in decimal values on the screen together with the adjustment bar and value. Example: 4 : 3 is displayed 1.33 : 1 16 : 9 is displayed 1.78 : 1

Press the CENT �/� button to move the cursor (z) to MEM SAVE, and press the ENTER button. The MEM SAVE screen appears. The current data is displayed on the left column under �CURRENT� and the data in the memory on the right column. If no data is stored in the memory, that item is shown by �� .�
MEM SAVE CURRENTzMEMORY1 INPUT VIDEO1 � SIGNAL OUTPUT ZOOM HSIZE HCENT VSIZE VCENT NTSC 31.5k x1 50 50 50 50 � � � � � � �

Calling up the stored data
1 2 Press the MENU button. The MENU 1 screen appears. Press the CENT �/� button to move the cursor (z) to MEM LOAD, and press the ENTER button. The MEM LOAD menu appears.
MEM LOAD MEMORY1zCURRENT INPUT VIDEO1 VIDEO2 SIGNAL NTSC NTSC OUTPUT ZOOM HSIZE HCENT VSIZE VCENT 31.5k x1 50 50 50 50 64k x2 50 80 60 80

English

ENTER CENT

.
V CENT 50
ASPECT 1.33:1 H SIZE 75

USE:

ENTER CANCEL:MENU

USE:

ENTER CANCEL:MENU

Current data
CENT

3

Press the CENT �/� button repeatedly to select the desired memory number (1 to 5), and press the ENTER button. The converter is adjusted to the selected memory data.

Note The aspect ratio is displayed only when a preset signal is input. If an HDTV signal is input, the aspect ratio is displayed based on the Japanese HDTV standard (1920�1035). For the preset signals, see page 49.

4

Press the CENT�/� button repeatedly so that the desired memory number (1 to 5) appears.
Memory number
MEM SAVE CURRENTzMEMORY3 INPUT VIDEO1 � SIGNAL NTSC � OUTPUT 31.5k � ZOOM x1 � HSIZE 50 � HCENT VSIZE VCENT 50 50 50 � � �

4

To cancel the operation, press the MENU button twice.

H CENT

50

To call up the stored data quickly Use the remote commander. See �Direct memory loading� on page 42.

The position of the picture is indicated on the screen by the adjustment bar and value 0 to 100. The factory preset value is 50.

CENT

Restoring the original picture size and position
Use GEOM RESET on the MENU 1 screen. (See page 41.)

USE:

ENTER CANCEL:MENU

39

40