This manual is a complete guide, including later additions. It has all the necessary information about the replacement items. The material quality is great to read.
Text excerpt from page 6 (click to view)
ALIGNMENT INSTRUCTIONS
SERVICE MODE ADJUSTMENTS
Follow the steps below whenever service adjustment is required. See Table- A and Table- B to determine if service adjustments are required. 1) How to enter the service mode using the user remote control. · Turn the set on.
· Direct the remote control to the reception window of TV. · Push buttons of remote control in sequence as follows.
1 MUTE DISPL AY MUTE · Then, the screen will appear as follows.
S2 S5 S6 S8 S9 S12 S7
SCRN IFC GEO W/B DP FACT PTRN NORMAL
· Using the channel up or channel down button, select the item you wish to adjust.
(The color of selected item turns into the red.) · Press the volume up or down button to enter in the service mode you wish to adjust. 2) How to memorize the adjusted values in the service mode.
· Must press DISPL AY button the state which the screen is displaying each of service menus after all adjustments are completed each of all service menu. Table-A : Adjust the values of service mode when a part is replaced. PART ADJUSTMENT REPLACED NECESSARY UNNECESSARY I701 (U-COM) I101 (MAIN) O O Initial setting values are written from I701. Adjusting Items I703 (EEPROM) O S5 S6 S8 S9 RFAGCD H.PHASE/V.POSI/V.SIZE RD/BD/RB/GB/BB Subbrightness Data is stored in I703. NOTES
CRT
O
Adjust items related to picture tube only.(White Balance adjustment)
