perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 40 (click to view)
Basic Setup�Continued
Speaker Settings
Speaker Impedance
This section explains how to specify the impedance of your speakers. Check the backs of your speakers or their manuals to determine their impedance. Note: Before you change this setting, turn down the volume.
2
Use the Up/Down [ ]/[ ] buttons to select �0. Hardware Setup,� and then press the [Enter] button. The Hardware Setup menu appears.
3
Use the Up/Down [ ]/[ ] buttons to select �1. Speaker Impedance,� and then press the [Enter] button. The Speaker Impedance menu appears.
Advanced Menu 0.Hardware Setup 0-1.Speaker Impedance
1 2, 3 2�4 1, 5
a.Minimum
:6 ohms
4
Use the Left/Right [
]/[
] but-
tons to select: 4 ohms: Select if the impedance of any one speaker is between 4 and 6 ohms. 6 ohms: Select if the impedances of all speakers are between 6 and 16 ohms.
5
Press the [Setup] button. The setup menu closes.
Notes: � This procedure can also be performed by using the DTR-8.4�s [Setup] button, [ ]/[ ]/[ ]/[ ] buttons, and [Enter] button.
1
Press the scroll wheel, and then press the [Setup] button. The main menu appears onscreen.