PHILIPS DVDR1000/051
Owner's Manual

English l l l

Manual recording
Checking input
Normally, the DVD recorder displays the contents of the disc on screen. Use the TUNER key in order to switch to the internal tuner, or whichever other source is selected, if you want to check the input before starting a recording. Press TUNER again to go back to disc mode.

l

After a short recording on a new disc, a few minutes will be needed to complete the formatting of the disc.

Recording
Insert a recordable DVD+RW disc. Use CHANNEL 3 or CHANNEL 4 (on the recorder) or P+, P- or the digit keys 0-9 (on the remote control) to select the programme number (programme name) from which you wish to record. � When a TV channel transmits a channel name, it will be shown on the display.

Direct record l Make sure �Direct record� is switched On. (See record settings). l On the TV set, select the programme number you want make the recording from. l Press RECORD (on recorder) or REC/OTR (on remote control) with the DVD recorder switched to standby. Notes: - Don�t select another programme number on your TV set, until �WAIT� on the display of your DVD recorder disappears. This can take up to one minute. - When �NOTV� appears on the display, the programme number could not be found. The DVD recorder switches off automatically. - If your loudspeakers are connected (via an amplifier/ receiver) to your DVD recorder, the sound will be delayed relative to the TV picture when recording directly from the TV set.

Manual audio control
You can control the audio recording level of your DVD recorder manually. l In tuner mode, press AUTO/MAN REC VOLUME on the DVD recorder. � The display will show the current audio level and MANUAL appears.
a P
TITLE
MUTE

CHAPTER

TIME

REMAIN

CHANNEL

TV/DVD

STANDBY
DVD RW SP RECORD

STOP

REC/OTR

PLAY

-40
REVERSE PAUSE SLOW FORWARD

-30

-20

-10

0

OVER

-40 MANUAL

-30

-20

-10 STEREO

0

OVER

PREVIOUS

NEXT

l

T/C

TUNER

l The following programme numbers are provided for recording from external sources: �EXT1� : TV set via SCART 1 socket �EXT2� : for recording from external sources via SCART 2 socket �EXT3� : rear S-video �EXT4� : rear CVBS �CAM1� : front S-video �CAM2� : front CVBS �CAM3� : front DV. Press RECORD (on the recorder) or REC/OTR (on the remote control). � RECORD is shown on the display. Press 9 STOP to stop recording. The Index Picture Screen is updated. � MENU UPDATE is shown on the display. l l

Adjust the recording level with MANUAL 3 or 4 on the DVD recorder, so that the �0 dB� mark lights up during the loudest parts of the recording. You can switch back to automatic audio level control by pressing AUTO/MAN REC VOLUME again. � The display will show the current disc position and MANUAL disappears.

Note: When DV input is selected, manual volume control is disabled.

32 RECORDING