ONKYO DVM301
Owner's Manual

For Proper and Long Use of This Unit
DISC RACK CAUTION
DISC/CHARACTER
( PUSH TO ENTER )

DO NOT BLOCK VENTS
Do NOT use the changer on top of a long-fibered carpet, bed or sofa, and do not cover it with a cloth, etc. This will prevent heat radiation and could result in damage.

AVOID HEAT
Do NOT place the unit on equipment which generates heat, such as an amplifier. When installing the unit in a rack, place it on the lowest shelf possible (however, not where it is exposed to dust) and separated from the amplifier to avoid the heat
PAUSE DIRECT CUSTOM

1

2

3

4

5

6

PLAY MODE

RANDOM

DISPLAY

INPUT

SEARCH

7
TEXT STANDBY

8

9

STANDBY/ON
ACCESS

AUDIO / VIDEO UPDATE

SINGLE LOADER
PLAY

10

CLEAR

OPEN /CLOSE STOP PLAY

KEYBOARD / MOUSE

generated by the amplifier or other audio equipment.
DVD �CHANGER

DV-M 301

CONDENSATION
� While changing or inserting discs, be careful not to press any buttons on the main unit or the remote controller. The rack may move suddenly, and then your fingers may be caught between discs in the rack. � When changing or inserting discs, make sure that the rack is stopped. Do not attempt to load a disc into the player when the rack is moving. � Never insert your hand or any object into the interior. This can cause a malfunction. � Never insert more than one disc at a time into one slot. This can scratch or damage the discs. � Do not apply force to the rack. This can cause a malfunction. Moisture may form in the operating section of the changer if the changer is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the changer�s performance will be impaired. To prevent this, let the changer stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the changer is exposed to the breeze from an air conditioner. In such cases, change the location of the changer.

DO NOT MOVE THE UNIT WHEN DISCS ARE LOADED IN THE RACK
Moving the changer when discs are loaded may damage the discs and may cause the changer to malfunction.

WHEN MOVING THE UNIT
When changing places of installation or packing the unit for moving, be sure to remove all of the discs from the rack and close the changer�s hood. Then, press STANDBY/ON and switch the power to standby. Check that the ��OFF�� indication on the display goes off, then disconnect the power cord. Moving this unit with the disc rack loaded may result in damage to this unit.

SWITCH POWER TO STANDBY WHEN NOT USING THE UNIT
Depending on the strength of the TV or radio broadcast signal, having the TV or radio on while power to the unit is on may result in stripes on the TV screen or noise. However, this is not a malfunction of this unit or the TV or radio. In such a case, switch the power of the unit to standby.

INSTALLATION
� Select a stable place to the side of a TV set or stereo system to be connected to the unit. � When using the unit with a stereo system, install the speakers a little bit away from the TV. � Do NOT install the unit on top of a TV or color monitor. Install the unit away from equipment that may be affected by magnetism, such as a cassette deck. � Do NOT place objects on top of the unit.

POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed in such a way that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Onkyo authorized service center or your dealer for a replacement.

AVOID INSTALLING IN A PLACE THAT IS:
� � � � � � Exposed to direct sunlight Exposed to humidity or where ventilation is poor Extremely hot or cold Exposed to vibration Exposed to dust Exposed to oily smoke, steam or heat (for example, a kitchen)

72