This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 13 (click to view)
Before Operation - VCR part
Setting the clock Manually
The clock in your DVD+VCR controls time and date settings for your DVD+VCR. The clock is set automatically during ACMS (Automatic Channel Memory System) when your DVD+VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.
To set the colour system
1
Press SETUP. Press b or B to select SET. Press OK. The auto adjust mode mode can be set to �OFF� by pressing OK if you want to set the time manually.
1 2 3 4
Press SETUP. The main menu will appear on the TV screen. Press 1 or 2 to select the SYS and press OK. Press 3 or 4 to select according to the COLOUR system used.
REC
AUD
P SET RSET ACMS MESECAM
AUTO PAL Pr-12
12
SYS
NIC
SYS
f OSD ON OFF
+
-
DECODER
i
HH MM -- : - 12
DD MM YY -- . -- . --
---
5
ACSS : ON
OK i
SET
Press 2 to select the RF AUDIO. Press 3 or 4 to select according to the RF AUDIO used.
2
Use 3 or 4 on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. The day of the week will appear automatically when you enter the year.
REC
AUD
PSET - D/KSET RF ACMS R
RF - I/I RF -Pr-12 1 B/G
+
2
SYS
NIC
SYS
ON OFF
f OSD
-
DECODER
i
6
HH MM 8 : 00 DD MM YY 1 . 01 . 07 MON
12
Press SETUP to remove the menus from the TV screen.
ACSS : OFF
OK i
SET
3 4
If you make a mistake press b or B and enter the correct details. Press SETUP.
