PHILIPS DVP534K/69
Owner's Manual

Getting Started
Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match. Helpful Hint: � Before changing the current TV Type setting, ensure that your TV supports the �selected TV Type� system. � Follow the instructions that appears on the TV screen. � If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
- - Video Setup Page - TV Type TV Display Closed Captions Angle Mark Progressive Smart Picture Picture Setting PAL NTSC Multi
HINTS:(refer to the owner's manual Changing to (selected TV Type) 1. Ensure your TV supports it. 2. If there is a blank screen on normal TV, wait 15 seconds for auto recover

E n g l i s h

OK

Cancel

< > - Move

OK - Select

Set TV Standard

1 Press SYSTEM MENU. 2 Press 1 2 to select �Video Setup Page�. 3 Use the 1 2 3 4 keys on the Remote
Control to navigate in the menu. Move to �TV Type� and press 2.

Confirm again to use (selected TV Type) If picture is good press OK on remote
Cancel

OK

TO GO BACK TO (Current TV Type): 1. Open tray 2. Press '3' Key < > - Move OK - Select

4

PAL � Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC � Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. Multi � Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. Select an item and press OK.

To exit from the menu Press SYSTEM MENU or select �Exit Setup Menu� and then press OK.

14
01-34 DVP532_4K_69 14 19/03/2004, 2:59 PM 8239

300 30471