Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Immediate response with excellent service - highly reccommended
Text excerpt from page 31 (click to view)
When you install the player on the wall
When you install the player on the wall, ask a qualified installer to do the job. The player should be installed in the following way. Attach the jack cover as in the same way for the horizontal installation. Fasten screws (not supplied) to the wall at the same height 3 1/4 in. (80 mm) apart. The screws should protrude by 3/16 to 7/32 in. (4 to 5 mm). Remove the seals covering the hanging holes. Hang the player on the screws. Push the player tightly against the wall.
3 1/4 in.
3/16 - 7/32 in.
Note
When you disconnect or connect the cords, take the player down from the wall.
Step 4: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet. Do not connect the power cord of your player to the �switched� power socket of an amplifier (receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for the player may be lost.
