|
Who's Online
There currently are 5948 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
15
The Video Adjust menu
3 Select the picture quality setting you want to adjust.
Memory1 Prog. Motion PureCinma YNR BNR MNR Sharpness Detail Off Off Off Soft Soft Motion Auto1 Max Max Max Fine Fine Still
ENTER
� Black Setup � Corrects the standard reference black level. The Black Setup setting is only valid for NTSC output signals. Black Setup is ineffective for HDMI output. � Gamma Correction � Adjusts the brightness of darker images. Gamma Correction is ineffective for HDMI output. � Hue � Adjusts overall balance between red and green. Hue is ineffective for HDMI output. � Chroma Level � Adjusts how rich the colours appear. Chroma Level is ineffective for HDMI output. 4 Adjust the currently selected setting.
HOME MENU
ENTER
You can adjust the following settings: � Prog. Motion � Adjusts the motion and still picture quality when video output is set to progressive. (Prog. Motion is ineffective when PureCinema is On.) � PureCinema � This setting optimizes the picture for film material when the video output is set to progressive. Usually set to Auto 1 but try switching to Auto 2, On or Off if the picture appears unnatural. � YNR � Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component. � BNR � Adjusts the amount of noise reduction (NR) applied to the block noise (artefacts visible in areas of flat colour, caused by MPEG compression). � MNR � Adjusts the amount of noise reduction (NR) applied to the mosquito noise (artefacts visible around the edges of an image, caused by MPEG compression). � Sharpness � Adjusts the sharpness of the high-frequency (detailed) elements in the picture. Sharpness is ineffective for HDMI output. � Detail � Adjusts how sharp edges appear. � White Level � Adjusts the intensity of white. White Level is ineffective for HDMI output. � Black Level � Adjusts the intensity of black. Black Level is ineffective for HDMI output.
5
Press to exit. Tip � To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.
108
En
|
|
|
> |
|