PIONEER DVR-LX60D (RCS-LX60D)
Owner's Manual

06

Recording

AUDIO

5

MAIN

SUB

+

If you�re recording from the A.TV

Pause Live TV
HDD

tuner, select the audio channel to record. See Changing A.TV audio channels on page 82 for more on this. � When recording in VR mode, if a broadcast is bilingual, both audio channels are recorded, allowing you to switch the audio channel on playback. The only exception to this is when the picture quality is set to LPCM, in which case you do need to select the audio channel before recording. 6
MAIN SUB

The Pause Live TV feature lets you effectively pause a TV programme you�re watching. When you�re ready to resume watching, just press the PLAY button.

Setting up for Pause Live TV
You can use the Pause Live TV feature with an AV Linkcompatible TV connected using a SCART cable (see TV tuner setup for Pause Live TV below), or using this recorder�s internal tuner (see Using the recorder�s internal tuner for Pause Live TV on page 85).

+

AUDIO

If you�re recording from the D.TV

tuner, select the audio language to record. � You may also be able to set which subtitle language to record; use SUBTITLE to select. � Note that audio and subtitle languages cannot be changed during the recording of a digital broadcast.
REC

TV tuner setup for Pause Live TV
To use this feature with an external TV tuner, the recorder must be connected to your TV using a SCART cable, and the AV. Link setting (page 145) should be set to This Recorder Only.2 See also Pause Live TV on page 145 for more on this. In order to use Pause Live TV, make the following connections and settings. � Pause Live TV will not work as expected when watching TV via an external component such as a VCR or digital tuner. It only works with the channel selected on the TV. Important � Pause Live TV only works with the built-in A.TV (analog) tuner. It does not work with the D.TV tuner or the external inputs. Make sure the Auto Channel Setting is set to Download from TV (see Auto Channel Setting on page 139). 1 Connect this recorder to your TV with a SCART cable. 2 Press HOME MENU.

7

ì

Start recording.

If you want to set a recording end time, press the ì REC button repeatedly. The recording time increases in 30 minute increments, up to a maximum of six hours. The time the recording will end is shown on-screen and in the front panel display. When the recording ends, the recorder automatically switches into standby if no other operation is being performed. � To cancel the set recording time, press ì REC. � If you want to pause recording at any time , press PAUSE. Press again to restart the recording (If recording to the HDD, DVD-RAM or in VR mode, a new chapter is started after recording restarts).
STOP REC

1

8

Press to stop recording. � If you set the recording time in the previous step, you can still stop the recording anytime by pressing STOP REC. � Recording will stop automatically when there is no more space on the HDD/DVD, or after 12 hours of HDD recording (whichever is sooner). Tip � During recording you can turn on/off the SCART loop through function. During recording, press the front panel CH + button to switch to SCART THRU (loop through on), or CH � to switch to SCART NORM (loop through off). Loop through is automatically reset to off after recording has finished. Note that you can�t switch loop through on if recording from the AV1 (RGB)-TV connector.

3 Select �Initial Setup� > �Options2� > �Pause Live TV� > �TV�s Tuner�. 4 Select �Initial Setup� > �Analog Tuner� > �Auto Channel Setting� > �Download from TV�. � If the Download from TV option appears grayed out, check the connections to your TV and try again. � Depending on your TV, you might have to switch off and unplug it for a few moments before plugging it back in and switching it on again. 5 Follow the on-screen instructions.

Note 1 Except during Chase Play.

84
En