perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 10 (click to view)
Options
Temp Boost Sensor
Cancel Heated Dry by pressing the pad again. No heat will be provided, but the fan will still operate. The dry option can be changed anytime tile dishwasher is on and the door is latched exeept when selecting the Quick or Rinse 6: Hold cycles. Cancelling the Heated Dry option on the Quick Cycle will eliminate the dry poltion entirely in order to shorten the cycle. The load will need to be towel dried. NOTE: Your dishwasher features an option recall which memorizes the option selected with a cycle. If Temp Boost Sensor, Stud Rinse or Heated Dry is selected with a particular cycle, it will be recalled automatically the next time that cycle is selected. Drain/Off When the Drain/Off pad is pressed, 2 MIN. will appear in the display and the dishwasher will drain for approximately 2 minutes. To cancel a cycle without draining, press the Drain/Offpad twice. This will immediately turn the dishwasher off.
If for any reason the incoming water temperature is below 120°F, press the Temp Boost Sensor pad to assure the water is heated to proper temperature for best cleaning and drying results. A small indicator light will glow when it is selected. The main wash will be extended and Heating Delay will appear in the display. Press the Temp Boost Sensor pad again to cancel the option, Sani Rinse
Press the Sani Rinse pad to turn the heating element on during the prewash (select cycles) and all rinses. A small indicator light will glow when it is selected. The Sani Rinse option helps maintain water temperature and improve drying results. This option is not available for the Rinse & Hold cycle, Press the pad again to cancel the option. Heated Dry
Seleet this option to provide heat during the fan dry cycle. A small indicator light will glow when it is selected.
