I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
Text excerpt from page 15 (click to view)
Rost und Blech einsetzen
3
Kippsicherung Alle Einschubteile sind mit einer kleinen Auswölbung rechts und links versehen. Diese Auswölbung dient als Kippsicherung und muss immer nach hinten weisen. Rost einsetzen: Rost so einsetzen, dass die beiden Führungsstäbe nach unten zeigen. Auf den Teleskopschienen den Rost so einsetzen, dass die beiden Bohrungen in die Haltebolzen der Teleskopschienen greifen. Blech einsetzen: Blech so einsetzen, dass die Kippsicherung nach hinten weist. Auf den Teleskopschienen das Blech so einsetzen, dass die beiden Bohrungen in die vorderen Haltebolzen der Teleskopschienen greifen. Rost und Blech einsetzen: Bei gemeinsamer Benutzung von Rost und Blech die Kippsicherung des Rostes genau in die Ausbuchtungen des Bleches setzen.
3
Um das Auflegen des Einschubteils bei unterschiedlich ausgezogenen Schienen zu erleichtern, Einschubteil hinten auf die Schienen legen, bis zum Anschlag einschieben und dann in die Haltebolzen vorne absenken.
