KAWAI E65
Owner's Manual

Frequently asked questions
Set up Page �DVD-Video: You can play DVD-Video multi channel surround by digitally connecting an amplifier equipped with a Dolby Digital, DTS or MPEG decoder. �DVD-Audio: This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound. �You cannot directly connect to the unit. Connect through the amplifier etc. �If you have a regular television (CRT: cathode ray tube) we recommend using the Scart terminal. You can enjoy high-quality RGB video from this unit by connecting to an RGB compatible television. If you have an LCD/plasma television or LCD projector compatible with progressive scan, connect through the component video terminals for high-quality progressive video. If you have a CRT television or a multi system television using PAL mode that is compatible with progressive scan, we cannot recommend progressive output as some flickering can occur. �All Panasonic televisions that have 625 (576)/50I · 50P, 525 (480)/60I · 60P input terminals are compatible. Consult the manufacturer if you have another brand of television. 9

What equipment is necessary to play multi channel surround sound?

�

Are the headphones and speakers directly connected to the unit? The television has a Scart terminal and component video input terminal. Which terminal should I connect with?

9

7, 8

Is my television progressive output compatible?

�

Disc

Can I play DVD-Video, DVD-Audio and Video CDs bought in another country? Can a DVD-Video that does not have a region number be played? Please tell me about DVD-R and DVD-RW compatibility with this unit.

�You cannot play DVD-Video if their region number does not include �2� or �ALL�. �The DVD-Video region number indicates the disc conforms to a standard. You cannot play discs that do not have a region number. �This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that are finalized. �This unit also records and plays high speed recording compatible discs. �This unit does not record or play DVD-RW. �This unit plays CD-R/CD-RW discs (audio recording discs) which have been recorded under one of the following standards: CD-DA, MP3 and Video CD. Close the session or finalize the disc after recording. �You cannot write to a CD-R or CD-RW with this unit.

Cover

�

� � � 14, 25

Please tell me about CD-R and CD-RW compatibility with this unit.

�

Recording

Can I record from a commercially purchased video cassette or DVD? Can a DVD-R recorded on this unit be played on other equipment? How many times can I write to a DVD-RAM disc? Can I record digital audio signals using this unit?

�Most commercially sold video cassettes and DVD are copy protected; therefore, recording is usually not possible. �You can play on DVD-R compatible players after finalizing the disc on this unit; however, due to the condition of the recording, play may not be possible. �You can write to the disc approximately 100,000 times depending upon the conditions of use. �You cannot record digital signals. The digital audio terminals on this unit are for output only. (The audio recorded using the DV automatic recording function from a digital video camcorder, for example, is recorded digitally.) �You can record if using the PCM signal. When recording DVD, change the �Digital Audio Output� settings to the following in the SETUP menu. �PCM Down Conversion: On �Dolby Digital/DTS/MPEG: PCM However, only as long as digital recording from the disc is permitted and the recording equipment is compatible with a sampling frequency of 48 kHz. �You cannot record MP3 signals. �With DVD-RAM, you can. Just press [AUDIO]. �With DVD-R, you cannot. Change before recording with �Bilingual Audio Selection� in the SETUP menu.

� 39

�

�

Can a digital audio signal from this unit be recorded to other equipment?

43

� 24 43

Can I switch to bilingual broadcast during recording?

RQT7542

51
51

Reference