A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
Text excerpt from page 6 (click to view)
Adjusting crisper Humidity Control.. .
You can control the amount of humidity in the moisture-sealed crisper, 1. The control can be adjusted to any setting between LO and HI. 2. LO (open) lets moist I -~~ ~~ air out of crisper for best storage of fruits and vegetables with skins. 3. HI (closed] keeps moist air in the crisper for best storage of fresh leafy vegetables
Adjusting
meat pan temperature...
Cold air flows against the meat pan through an opening between the freezer and the refrigerator. This helps keep the meat pan colder than the rest of the refrigerator. Set the control to let more or less cold air through.
/
Use Pan Temperatures Meat Control to Adjust
�di
Adjusting
shelves.. .
To replace:
1. Guide the rear hooks into the slots in the shelf supports. 2. Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
Gloss shelves ore heovy Be careful
To remove door shelves:
l
Lift up and out
To replace: To remove glass shelves:
1. Tilt up at front. 2. Lift up at back. 3. Pull shelf straight out. Insert hooks into guides on both sides. 8 Push down.
l
Removing freezer shelves.. .
1. Lift front slightly 2. Lift back off supports. 3 Replace in reverse order
Lltt the Front Then the Back
,,
Removing freezer bin.. .
For proper arr movement. place when the refrtgerator keep the freezer bin In IS operatrng
To remove the bln:
l l l
Slide out to the stop. Lift the front to clear the stop Slide out the rest of the way
To replace
l l
the bln:
l
Place bin on the sltdes Make sure the stops clear the front of the slrdes Slide bin in
