This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
Was happy to find the complete owners manual... It's all in there, just like the original...
Text excerpt from page 10 (click to view)
Plan to remove
l
and empty
the storage
bin:
l
l
If the ice dispenser has not, or will not be used for a week or more; If a power failure causes ice in the bin to melt and freeze together; If the ice dispenser is not used regularly.
1. Pull the covering
panel out from the bottom and slide it to the rear.
2. Lift the signal arm so it clicks into the OFF position. Ice can still be dispensed, but no more will be made.
Night
light
S
3. Lift the front of the storage bin. Pull it out. 4. Empty the bin. Use hot or warm water to melt the ice if necessary. Never use anything sharp to break up ice in the bin. This can damage the bin and dispenser mechanism. 5. Wash with mild detergent. Rinse well. Do not use harsh or abrasive cleansers or solvents. 6. When replacing the bin, make sure it is pushed in all the way. Push the signal arm down to the ON position to restart ice production.
The night
light uses a heavy-duty IO-watt bulb. When it burns out, purchase another from Your dealer.
