A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Text excerpt from page 12 (click to view)
Adjusting
the crisper
cover
track
Because your crispers are not the same size, your crisper cover has an adjustable center track so you can switch positions of the crispers. You can adjust the center track with the cover in the refrigerator by removing the crispers and the cover insert.
To remove the center track: 1. Push up the cover insert from the bottom,
than slide out with both hands. 2. Gently pull up on front end of track. 3. Pull rear end of track out of opening in cover.
To replace the center track: 1. Insert rear end of track (with hole) into
opening in cover. 2. Lower front end of track into slot. 3. Make sure rear end of track has snapped into place on underside of cover.
Adjusting
the freezer
shelf
Adjust the freezer shelf to match the way you uw your freezer.
To mmovo the shelf: 1. Lii entire shelf slightly.
2. Move shelf all the way to one side. 3. Tilt other side up and out of shetf support 4. Pull shetf up and out.
To replace the sheW: 1. Tilt the shelf ad insert into freezer
compartment. 2. Insert ons end of the shelf all the way into the center of the shelf support cups. 3. Lower other and d shetf and insert into the shelf support cups. 4. Lower shelf into place. NOTE: The shalt should lower slightly and lock into plaoe. If the shelf does not appaar sturdy, make sure both ands of the shelf are inserted into the shelf support cups. 12
