This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 8 (click to view)
Removing
(on some models)
the meat drawer
and cover
Remove meat
To remove the meat drawer: 1. Slide meat drawer out to the stop.
2. Lift front of meat drawer. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order.
To remove the cover: 1. Remove meat drawer.
2. Push cover back to release rear clips from shelf. 3. Tilt cover up at front. 4. Pull cover forward and out.
To replace the cover: 1. Fit notches and clips on underside of cover over rear
and center cross bars on shelf. 2. Lower cover into place. 3. Pull cover forward to secure rear clips onto shelf. 4. Replace meat drawer.
Removing
2. Lift the front.
the crisper(s)
and crisper
then the back.
cover
To remove the crisper(s): 1. Slide crisper(s) straight out to the stop.
3. Slide out the rest of the way. 4. Replace in reverse order.
To remove the cover: 1. Lift cover front and remove the cover support.
2. Lift cover up and slide out.
To replace the cover: 1. Fit cover tabs into lowest cabinet slots and push in.
Lower the front retainers into place. 2. Insert cover support (with the long tab toward the front) into the groove on the underside of the cover. NOTE: If the support needs adjustment, turn base clockwise to raise or counterclockwise to lower.
