|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Changing the light bulb.. .
WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigemtor at the main power supply. Shock and injury could occur.
,I= -.u.^7r,--l&&d.Ma-:s C�I1,h..-. I ?.m*.mmi* 1. Reach behind control console to find bulb 2. Remove bulb. 3. Replace with a 40-watt appliance bulb. m-5 -*.I-a?-c. ,m.:-. -1-
Moving the meat pan and cover...
The meat pan and cover can be removed for cleaning and moved to another shelf, if desired Remove the meat pan first
Removing:
1. Slide the pan out to stop 2. Lift the front of meat pan. 3. Slide pan the rest of the way out. 4. Tilt cover up at front 5. Pull forward and out.
Replacing:
1. Fit notches underneath cover over rear and center cross bars on shelf. 2. Lower cover in place. 3. Replace meat pan in reverse order.
Adjusting
1 2. 3. 4.
the refrigerator
shelves...
Frrst, remove food from shelf. Slide shelf strarght out to stop Lrft front. Slide the rest of the way out
Replacing
Shelf:
Shelf Guide
I. Fit back of shelf on top of guides with wire stops on the bottom of guides. 2 Lift front, slide shelf in until It clears guide stops.
,�^.b. .*.,A E... ~. ..S.
Removing crispers and crisper cover.. .
Removing the Crispers:
1, Slide crisper straight out to stop, lift front, then slide the rest of the way out. 2. Replace in the reverse order
Lift the Front, Thmn +hn Rflrk
A
/Ii 1
i I
Removing Cover:.
I. Lift front and remove the cover support 2. Lift out cover by pulling up and out,
Replacing
Cover:
1 Fit back of cover into notch supports on walls of refrigerator, then lower front into place. 2 Replace cover support with the long tab towards the front. Note: If support needs adjustment,.turn base right to lower, or left to raise.
Removing and adjusting the freezer shelf...
To remove shelf:
1. Lift front slrghtly 2 Lift back off supports. 3 Replace in reverse order.
To adjust shelf:
1 2 3 4. Remove shelf Remove supports by sIrdIng upwards Replace supports on desired level Replace shelf
Reversing the door swing. .,.
You can change the hinges on your refrigerator so the doors open the other way. Refer to the instruction sheet included with your refrigerator. 6
|
|
|
> |
|
