I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 12 (click to view)
Adjusting
the crisper
cover
track
Because your crispers are not the same size, your crisper cover has an adjustable center track so you can switch positions of the crispers. You can adjust the center track with the cover in the refrigerator by removing the crispers and the cover insert.
To remove the center track: 1. Push up the cover insert from the bottom,
than slide out with both hands. 2. Gently pull up on front end of track. 3. Pull rear end of track out of opening in cover.
To replace the center track: 1. Insert rear end of track (with hole) into
opening in cover. 2. Lower front end of track into slot. 3. Make sure rear end of track has snapped into place on underside of cover.
Adjusting
the freezer
shelf
Adjust the freezer shelf to match the way you uw your freezer.
To mmovo the shelf: 1. Lii entire shelf slightly.
2. Move shelf all the way to one side. 3. Tilt other side up and out of shetf support 4. Pull shetf up and out.
To replace the sheW: 1. Tilt the shelf ad insert into freezer
compartment. 2. Insert ons end of the shelf all the way into the center of the shelf support cups. 3. Lower other and d shetf and insert into the shelf support cups. 4. Lower shelf into place. NOTE: The shalt should lower slightly and lock into plaoe. If the shelf does not appaar sturdy, make sure both ands of the shelf are inserted into the shelf support cups. 12
