Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
So usefull to make my installation a breeze. 5 stars on quality.
Text excerpt from page 6 (click to view)
Installing
it properly
1. Allow 1/2inch (1.25 cm) space on each
side and at the top of the refrigerator for ease of installation. 2. If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider. 3. The refrigerator can be flush against the back wall.
Leveling
it
Right to raise;
Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below. 1. Remove base grille. (See page 12.) 2. To raise front, turn screw clockwise. 3. To lower front, turn screw counterclockwise. 4. Check with level. 5. Replace base grille. (See page 12.)
