Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 18 (click to view)
4. Drain filter
The drain filter collects threads and small
objects inadvertently left in the laundry. Check regularly that the filter is clean. Open the filter door. Place a container under the filter and unscrew it.
P0011
P0132
Pull out the filter. Clean the filter under a running tap, then refit it, screwing it fully in.
P0133
P0040
5. Emergency emptying out
If the water is not discharged proceed as follows to empty out the machine: I pull out the plug from the power socket; I close the water tap; I if necessary, wait until the water has cooled down; I place a bowl on the floor; I put the drain hose end into the bowl and let the water come out.
6. The dangers of freezing
If the machine is exposed to temperatures below 0°C, certain precautions should be taken. I Turn off the water tap. I Unscrew the inlet hose. I Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hose in a bowl. Run the draining programme until the selector dial is in the �Stop� position. I Switch the machine off. I Screw the inlet hose and reposition the drain hose. I When you intend to start the machine up again, make sure that the room temperature is above 0°C.
