Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 8 (click to view)
Support handle
Place the support handle at your favorite position and tighten the handle securely.
Note:
Use under extremely hot or cold conditions will reduce operating capacity per charge.
Release lever
Battery pack Installation and Removal
-For removalPull the release lever to free the battery holder.
Loosen Tighten Battery holder
Depth gauge
Loosen the support handle and adjust the depth gauge at your favorite depth. After adjusting, tighten the support handle and fix depth gauge.
Release lever
-For installationFit the battery holder unit it clicks in position.
Depth gauge Depth of drilling
Battery pack
For Appropriate use of Ni-MH Battery Pack EY9210 Charge the Ni-MH battery fully before storage in order to ensure a longer service life. The ambient temperature range is between 0°C (32°F) and 40°C (104°F). If the battery pack is used when the battery temperature is below 0°C (32°F), the tool may fail to function properly. In that case, charge the battery until charging is completed for appropriate functioning of the battery.
Note: Charge a new battery pack, or a battery pack that has not been used for a prolonged time, for about 24 hours to bring the battery up to full charge. 1. Plug the charger into an AC outlet. 2. Insert the battery pack firmly into the charger.
Battery charger (EY0214)
Battery pack life
The rechargeable batteries have a limited life. If operation time becomes extremely short after recharging, replace the battery pack with a new one.
