Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 23 (click to view)
It is possible to interrupt the programme by: q opening the door q pressing the On/Off push button (in this case all the indicator lights turn off) Close the door again or press the On/Off, the programme will start from the point in which it was interrupted.
8b. Setting and starting the programme with �Delay Start�
The setting of the delay start occurs before selecting the programme. Select the desired time (3, 6 or 9 hours) by pressing the �Delay Start� push button until the indicator light corresponding to the chosen hours flashes. Press the push button corresponding to the required programme: the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. The start of the countdown will occur after about 6 seconds from the last pressure of a push button. The countdown will decrease with step of 3 hours and you are informed of this by the indicator lights of the �Delay Start�. During the countdown the only indicator lights illuminated are the programme light and the light of the number of hours to the start of the programme. Once the delayed time has elapsed the programme will start automatically. It is possible to stop a countdown in progress or before it starts, simply pressing the �Delay Start� push button until the indicator lights of the hours are off.
9. To cancel a programme in progress
A programme in progress can be cancelled at any time. Press for about 3 seconds the push button of the running programme until all indicator lights are off. Only the On/Off indicator light will remain on once the programme has been cancelled. It is now possible to select a new washing programme.
10. At the end of the washing programme
The dishwasher will automatically stop and the phase indicator light �end of programme� will come on. The indicator light of the programme just ended will remain on. The dishwasher has finished the programme ONLY when the �end of programme� indicator light is illuminated. If you do not wait for the end of the programme it will not be possible to start a new programme if first you do not cancel the previous. (For instructions on how to cancel a programme see point 9).
