Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 22 (click to view)
l
Remove the broiler pan grid and any pots and pans being stored in the oven. NOTE: You can clean the broiler pan
(without grid) in the oven if you have first removed most of the soil by hand-cleaning a or in dishwasher. If most of the soil is not removed, too much smoking will occur.The chrome broiler pan grid will discolor if cleaned in the Self-Cleaning cycle. Wipe out any loose soil or grease. This will help reduce smoke during the SelfCleaning cycle.
l
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
l
l
Do not use commercial oven cleaners in your oven. Failure to follow the above could result in burns or hazardous fumes.
l
Remove the oven racks from the oven if you want them to remain shiny. You
can clean the oven racks in the Self-Cleaning cycle, but they will become harder to slide. (See page 27.) If you clean racks in the SelfCleaning cycle, place them on the 2nd and 4th rack guides. (Guides are counted from bottom to top.) Heat and odors are normal during the Self-Cleaning cycle. Keep the kitchen well ventilated by opening a window or by turning on a vent hood or other kitchen vent during the cycle.
NOTES: l Do not force the Lock Lever. You could
bend . or .break it. The lever is designed to . .. . stay locked until the oven is cool enough to safely open. Wait until it moves freely. Do not block the vent during the SelfCleaning cycle. Air must move freely for best cleaning results. Do not leave any foil in the oven during the Self-Cleaning cycle. Foil could burn or melt and damage the oven surface. Do not leave plastic utensils near the vent. They may melt. The oven light will not work during the Self-Cleaning cycle.
l
l
l
l
l
Setting
the controls
1. Move the Lock Lever to the right - the Clean position. When the oven temperature goes above normal baking/roasting temperatures, the door cannot be opened and the Lock Lever must not be moved.
2. Set the Oven Selector and Oven Temperature Control Knob to CLEAN.
3. Make sure the clock and Start and Stop Times all have the correct time of day.