|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
Section
09
Digital Signal Processor
2 Press c or d to select an equalizer curve. Each press of c or d selects equalizer curves in the following order: S-BASSPOWERNATURALVOCAL FLATCUSTOM1CUSTOM2
selected, the CUSTOM2 curve will be updated. 1 Recall the equalizer curve you want to adjust. See Recalling equalizer curves on the previous page. 2 Press DSP to select 9-band graphic equalizer. Press DSP until 50Hz appears in the display.
Adjusting equalizer curves
exception of FLAT, can be adjusted to a fine degree (nuance control). 1 Recall an equalizer curve.
The factory supplied equalizer curves, with the
# If 9-band graphic equalizer has been previously adjusted, the frequency of that previously selected will be displayed instead of 50Hz.
See Recalling equalizer curves on the previous page. 2 curve. Each press of a or b increases or decreases the equalizer curve respectively. +6 5 (or 6) is displayed as the equalizer curve is increased or decreased. Press a or b to adjust the equalizer
3 Press c or d to select the equalizer band to adjust. Each press of c or d selects equalizer bands in the following order: 501002004008001.6 k3.15 k 6.3 k12.5 k (Hz) 4 Press a or b to adjust the level of the equalizer band. Each press of a or b increases or decreases the level of the equalization band. +6 6 is displayed as the level is increased or decreased.
# The actual range of the adjustments are different depending on which equalizer curve is selected.
# The equalizer curve with all frequencies set to 0 cannot be adjusted.
# You can then select another band and adjust the level.
Adjusting 9-band graphic equalizer
For CUSTOM1 and CUSTOM2 equalizer curves, you can adjust the level of each band. ! A separate CUSTOM1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than CUSTOM2 is selected, the equalizer curve settings will be memorized in CUSTOM1. ! A CUSTOM2 curve can be created common to all sources. If you make adjustments when the CUSTOM2 curve is
Using the position selector
One way to assure a more natural sound is to clearly position the stereo image, putting you right in the center of the sound field. The position selector adjusts the volume level of sound from each speaker to match seat positions and the number of people in the car and lets you recall settings at the touch of a button. Here is a list of the positions:
34
En
|
|
|
> |
|
