First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Text excerpt from page 12 (click to view)
2. Disassembly
2-4.Removing DSC BLOCK
Remove in the order indicated by circled numbers. <Step 1>
3 2
FinePix S2 Pro (U/E) SERVICE MANUAL
(1) Pull out CR SPACER ASSY from the camera body in the direction of the arrow. (2) Remove eight screws(BB14857-100, M1.7x3.0). (3) Remove DSC BLOCK in the direction of the arrow.
1 2
2
<Step 2>
(4) Remove the harness from connector (CN300) of MAIN PWB ASSY. (5) Remove the lock of connector (CN500) of MAIN PWB ASSY, and remove FFC.
5
4
[Notes of assembly of DSC BlOCK. ] (1) Note diagonal insertion and the half insertion when you lock FFC and the harness to the connector. (2) Confirm there is no space when "DSC BLOCK" and "MAIN BODY" are combined, and the screw is tightened.
