SHARP FOB1600
Owner's Manual

Optional A.M. Mode Settings

Time selections for the period of silence are 1 to 10 seconds. Quiet Detect Time has been set to 4 seconds at the factory. This gives the best performance with most answering machines; however, you may need to adjust this setting depending on the disconnect time of your answering machine. Some answering machines may have unusually fast disconnect times (equal to or very slightly less than 4 seconds), which means that the answering machine may disconnect the line before fax reception can begin. In this case, try a Quiet Detect Time setting of about 3 seconds. If the fax machine is interrupting callers before they can leave a message, try a longer Quiet Detect Time setting. If your outgoing message includes a period of silence, make sure that the setting is longer than that period of silence, or re-record your outgoing message to shorten the silence.
Note: Quiet Detect Time can be turned off by entering "00" for the time. Note, however, that the fax machine will not be able to receive faxes sent manually by Normal dialling.

To change the setting, follow the steps below.

1

Press

FUNCTION

once and

3 times.

Display:

2 3 4

Press

once and

6 times.

QUIET TIME

Press

once.

ENTER (00-10) 04

Enter a number from 01 to 10, or enter 00 to turn off the function. Example: 3 seconds

The display briefly shows your selection, then:

QUIET START

0

3

5

Press

STOP

to return to the date and time display.

69

5. Answering

Machine

OPTION SETTING