Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
Text excerpt from page 21 (click to view)
Using the Timers
Setting the SLEEP Timer
(Using the Remote Control) Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by itself rather than play all night. s You can only set the Sleep Timer when the System is on and a source is playing.
1 2
Play a CD or tune in to the desired station.
Press the SLEEP button on the Remote Control.
The �SLEEP� indicator lights up. sWhen the clock is not set, �CLOCK� and �ADJUST� appear alternately on the display. Set the clock at first.
3
Set the length of time you want the source to play before shutting off.
� Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence: 10 = 20 = 30 = 60 = 90 = 120 = Cancelled = (back to the beginning)
The selected number of minutes for the Sleep Timer will stop blinking five seconds later and the display returns to the original one before setting the Sleep Timer. (The display is dimmed.) The System is now set to turn off after the number of minutes you set. To Confirm the Sleep Time: When the SLEEP button is pressed, the remaining sleep time is displayed. Wait until the display returns to the original display. To Cancel the SLEEP Timer Setting: Press the SLEEP button until the �SLEEP� indicator goes out on the display. Turning off the System also cancels the SLEEP Timer. s If you are setting the Daily Timer, the System will be turned on at the set time to wake you up.
