I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
complete part-lists and pcb layout, schematic diagram is good enlargable,
Text excerpt from page 55 (click to view)
31 January 1996
INSTALLATION PROCEDURE (COPIER)
3.2 KEY COUNTER HOLDER INSTALLATION
[I]
[C] [H] [F]
[B] [A]
A170I521.img
[G] [D] [J] [E]
A170I522.img
N CAUTION:
Unplug the copier power cord before starting the following procedure. NOTE: The Key Counter Bracket Set includes the following parts. The key counter holder and key counter should be procured locally. 1. Key Counter Bracket ......................................... 1 2. Key Counter Plate Nut....................................... 1 3. Key Counter Cover ............................................ 1 4. Bushing.............................................................. 1 5. Screws ............................................................... 8 6. Clamp ................................................................ 1 1. Open the right front door and remove the right inner cover (3 screws). 2. Remove the dummy connector [A]. 3. Remove the right cover [B] (2 screws) and small cap [C]. 4. Connect the key counter holder [D] to key counter bracket [E] with key counter plate nut [F] (2 screws). 5. Run the key counter harness [G] through the bushing [H] and right cover hole [I] and fix the key counter harness (1 screw and 1 harness clamp). 6. Install the key counter bracket to the right cover (3 screws). 7. Set the key counter harness connector to the 4P connector from the copier. 8. Reinstall the right cover. 9. Install the key counter cover [J] (2 screws). 10. Reassemble the machine.
