Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
So usefull to make my installation a breeze. 5 stars on quality.
Text excerpt from page 22 (click to view)
Recording
English
CD Synchro Start Recording
During CD synchro start recording, ¶ Do not fast forward/rewind your tape in tape deck 2.
1
Load a blank tape into tape deck 1 and a disc into the disc tray. 2 Press CD. ¶ You can program the tracks in the order you want them to be recorded (see Programming Tracks). If you do not, the tracks are recorded according to the order on the selected disc. 3 Press RECORD on tape deck 1 to start recording. � The REC starts flashing. 4 Press STOP�OPEN on tape deck 1 to stop recording, then press � to stop CD playback.
Notes: � At the end of side A, flip the tapes to side B and repeat the procedure. � Dubbing of tapes is only possible from tape deck 2 to tape deck 1. � To ensure good dubbing, use tapes of the same length.
Recording from other sources
(only on tape deck 1) 1 Load a blank tape into tape deck 1. 2 Press CD, TUNER or AUX. ¶ Start playback of the selected source. 3 Press RECORD on tape deck 1 to start recording. � The REC starts flashing. 4 Press PAUSE to interrupt recording. 5 Press STOP�OPEN on tape deck 1 to stop recording. Note: � During recording, it is not possible to listen to another sound source.
Dubbing tapes (from tape deck 2 to tape
deck 1) 1 Load the prerecorded tape into tape deck 2 and a blank tape into tape deck 1. ¶ Make sure both tapes have their full spool to the left. 2 Press PAUSE on tape deck 1. 3 Press RECORD on tape deck 1. � The REC starts flashing. 4 Press PLAY� on tape deck 2. ¶ Recording will start automatically. 5 Press STOP�OPEN on tape deck 1 and tape deck 2 to stop dubbing.
