|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
 ;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
 ;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Recording
English
CD Synchro Start Recording
During CD synchro start recording, ¶ Do not fast forward/rewind your tape in tape deck 2.
1
Load a blank tape into tape deck 1 and a disc into the disc tray. 2 Press CD. ¶ You can program the tracks in the order you want them to be recorded (see Programming Tracks). If you do not, the tracks are recorded according to the order on the selected disc. 3 Press RECORD on tape deck 1 to start recording. � The REC starts flashing. 4 Press STOP�OPEN on tape deck 1 to stop recording, then press � to stop CD playback.
Notes: � At the end of side A, flip the tapes to side B and repeat the procedure. � Dubbing of tapes is only possible from tape deck 2 to tape deck 1. � To ensure good dubbing, use tapes of the same length.
Recording from other sources
(only on tape deck 1) 1 Load a blank tape into tape deck 1. 2 Press CD, TUNER or AUX. ¶ Start playback of the selected source. 3 Press RECORD on tape deck 1 to start recording. � The REC starts flashing. 4 Press PAUSE to interrupt recording. 5 Press STOP�OPEN on tape deck 1 to stop recording. Note: � During recording, it is not possible to listen to another sound source.
Dubbing tapes (from tape deck 2 to tape
deck 1) 1 Load the prerecorded tape into tape deck 2 and a blank tape into tape deck 1. ¶ Make sure both tapes have their full spool to the left. 2 Press PAUSE on tape deck 1. 3 Press RECORD on tape deck 1. � The REC starts flashing. 4 Press PLAY� on tape deck 2. ¶ Recording will start automatically. 5 Press STOP�OPEN on tape deck 1 and tape deck 2 to stop dubbing.
22
pg 01-27/C100/22-Eng 22 12/6/00, 3:18 PM
3139 115 20281
|
|
 |
> |
|
|
Parse Time: 0.184 - Number of Queries: 123 - Query Time: 0.038