perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 23 (click to view)
Recording
CD Synchro Start Recording
During CD synchro start recording, ¶ Do not fast forward/rewind your tape in tape deck 2.
Recording from other sources
(only on tape deck 1) 1 Load a blank tape into tape deck 1. 2 Press CD, TUNER or AUX. ¶ Start playback of the selected source. 3 Press RECORD on tape deck 1 to start recording. � The REC starts flashing. 4 Press PAUSE to interrupt recording. 5 Press STOP�OPEN on tape deck 1 to stop recording. Note: � During recording, it is not possible to listen to another sound source.
1
Load a blank tape into tape deck 1 and a disc into the disc tray. 2 Press CD. ¶ You can programme the tracks in the order you want them to be recorded (see Programming Tracks). If you do not, the tracks are recorded according to the order on the selected disc. 3 Press RECORD on tape deck 1 to start recording. � The REC starts flashing. 4 Press STOP�OPEN on tape deck 1 to stop recording, then press � to stop CD playback.
Dubbing tapes (from tape deck 2 to tape deck 1) 1 Load the prerecorded tape into tape deck 2 and a blank tape into tape deck 1. ¶ Make sure both tapes have their full spool to the left. 2 Press PAUSE on tape deck 1. 3 Press RECORD on tape deck 1. � The REC starts flashing. 4 Press PLAY� on tape deck 2. ¶ Recording will start automatically. 5 Press STOP�OPEN on tape deck 1 and tape deck 2 to stop dubbing.
Notes: � At the end of side A, flip the tapes to side B and repeat the procedure. � Dubbing of tapes is only possible from tape deck 2 to tape deck 1. � To ensure good dubbing, use tapes of the same length.
