5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 22 (click to view)
22
1 2 3
EN
GETTING STARTED (cont.)
Inserting the Memory Card
Make sure to turn the Power dial to �OFF�, when inserting a Memory card. Memory card is not loaded in the camera, when purchasing the camera. Open the Memory card cover. �Slide the knob towards �OPEN�. Insert the Memory card. �Insert the card so that the contact surface is facing up and the notch on the card is on the right. �Do not touch the contact surface on the card. Close the Memory card cover. �Slide the knob to lock the cover. Contact surface
NOTES:
� There are two types of Memory cards (the 3.3V type which is indicated by a notch on the right side, and the 5V type which is indicated by a notch on the left side). This camera uses only Memory cards (3.3V) with a notch on the right side. � The maximum memory card capacity that can be used with this camera is 64MB. � To avoid damage to the Memory card, do not drop or strike the Memory card against hard objects. � To protect the entire content of the Memory card after shooting, peel and stick a write protect sticker as shown in the right.
Where the write protect sticker is placed
3.3V
5V
Removing the Memory Card
1 2
Open the Memory card cover. �Slide the knob towards �OPEN�. Remove the Memory card. �Push on the card to remove it.
