|
Who's Online
There currently are 6041 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Another excellent buy! A fully readable PDF archive. Good prints!!
;
It is wonderful done!!! a great job in scanning the manual. Superior quality in all the electric scheme. Very understandable and net!!! Thank you!
;
muy buen manual por lo completo de este algunos esquemas estan muy divididos lo que hace algo dificil el seguimiento.
;
very good manual, with detail and clarity in esquematic diagrams and waveforms .
;
Very quality copy of original service manual, which contains the circuit diagrams, PCB and lists of components, well as recommendation for calibration procedures of device, also everything else, that need for repair, tuning and use this oscilloscope.
All presented copies have high-resolution, so you can view all in detail.
This manual will very useful for simple owners and for repairers.
I recommend these manual, because myself is owner of Philips PM3216 and I need sometimes servicing these oscilloscope (principally calibrating).
Also, these document is an example of excellent design of technical documentation.
3.2.13 REMOVING THE TEMP PWB (Fig.2) � Remove the REAR COVER. (1) Pull out the TEMP PWB from the claw of the TOP FRAME. 3.2.14 REMOVING THE CONTROL PWB (Fig.2) � Remove the REAR COVER. (1) Remove the 2 screws [A]. (2) Remove the CONTROL KNOB. (3) Remove the CONTROL PWB from the TOP FRAME. 3.2.15 REMOVING THE CHASSIS BASE AND TOP FRAME (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. (1) Remove the 2 screws [B]. (2) Remove the CHASSIS BASE. (3) Remove the 2 screws [C] and the 2 screws [D]. (4) Remove the TOP FRAME. 3.2.16 REMOVING THE LED PWB (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. � Remove the CHASSIS BASE. � Remove the TOP FRAME. (1) Remove the 1 screw [E]. (2) Remove the LED PWB. 3.2.17 REMOVING THE LCD PANEL UNIT (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. � Remove the CHASSIS BASE. � Remove the TOP FRAME. (1) Remove the 2 screws [F] and the 2 screws [G]. (2) Remove the BOTTOM FRAME. (3) Remove the LCD PANEL UNIT from the FRONT PANEL.
1-14 (No.YA347)
|
|
|
> |
|