Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
Text excerpt from page 27 (click to view)
27
MENU
GAIN UP S.LX To record a subject in a dark lit environment. When it is more convenient to shoot the subject with a brighter image even if the picture becomes slightly coarse. Automatically selected when the PROGRAM AE select dial is set to AUTO LOCK mode. (S.LX : Super LoLux) To record a subject in a dimly lit environment. When it is more convenient to shoot with a less coarse picture although the subject becomes slightly dark. This setting is suitable for measuring sensitivity conforming to EIA-639 (EIA* Standard for Low Light Sensitivity Measurement) *EIA : Electronic Industries Association Allows you to shoot dark scenes with no picture brightness adjustment. Usually set to this position. Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting. When set to �ON�, you can shoot a subject as large as possible at a distance of approx. 60 cm. �Depending on the zoom position, the lens may go out of focus. This feature allows you to set the parameters for Self-Timer ( pg. 28) and Time-Lapse recording ( pg. 29).
NORM
OFF TELE MACRO OFF ON
INTERVAL TIMER
OFF 15 S 30 S 1 MIN 5 MIN
REC TIME
JLIP ID NO.
OFF This feature allows you to set the parameters for Animation 1/4 S and Time-Lapse recording ( pg. 29). 1/2 S 1S This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07. Allows you to input characters. ( pg. 23). pg. 11). Allows you to set the current date and time (
SET CHARACTER DATE/TIME
= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK
NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case, use Manual Focus ( pg. 21).