perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 57 (click to view)
EN57
Power Switch
Dubbing From A VCR
[To use this camcorder as a recorder]
1
To AV To S-VIDEO
Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 52 and 53. Set �SOUND MODE� to �12 BIT� or �16 BIT� and �REC MODE� to �SP� or �LP� in the Menu Screen depending on your preference ( pg. 39). Set the camcorder�s Power Switch to � � while pressing down the Lock Button located on the switch. Turn on the VCR�s power and insert the appropriate cassettes in the camcorder and the VCR.
2 3 4 5
Connector cover**
Set �S/AV INPUT� to �ON� in the Menu Screen to engage the analogue input mode ( pg. 39). Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode. � AV. IN � appears on the screen. Engage the VCR�s Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point. Press the Recording Start/Stop Button on the camcorder to engage the Record mode. rotates on the screen. Engage the VCR�s Play mode. To stop dubbing, press the Recording Star/Stop Button on the camcorder so that stops rotating, then engage the VCR�s Stop mode. Repeat steps 6 through 8 for additional editing. Set �S/AV INPUT� back to �OFF� in the Menu Screen to disengage the analogue input mode ( pg. 39).
S-Video cable (provided)
Audio/Video cable [mini-plug to RCA plug] (provided)
6 7
To AUDIO, VIDEO* and S-VIDEO OUT connectors
8 9 10
VCR (Playback deck)
TV
* Connect when an S-Video cable is not used. ** When connecting the cables, open this cover.
NOTES: � It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. 7). � Analogue signals can be converted to digital signals with this procedure. � It is also possible to dub from another camcorder.