Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point. Set the VIDEO/DSC Switch to � �, then set the Power Switch to � � while pressing down the Lock Button located on the switch. To select a still image to be dubbed, perform Index Playback ( pg. 29), Auto Playback ( pg. 28) or press 2 or 3 to select the image you wish. To engage Dub-Standby, press SNAPSHOT. The message �TO COPY TO TAPE PUSH "SNAPSHOT"� appears. While the message is being displayed, press SNAPSHOT. The selected still image is recorded on the tape for approx. 5 seconds. �The indicator disappears when dubbing is complete.
3 4 5 6
2
3
VIDEO/DSC Switch (Open the LCD monitor to access this switch.)
NOTE: If SNAPSHOT is pressed in step 5 when the tape�s erase protection tab is set to �SAVE�, the message �COPYING FAILED� is displayed.
